| TRD2000 Corrolla p/n's | |
|
|
|
Author | Message |
---|
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Mon Dec 16, 2013 9:34 pm | |
| Any leads on a set up? For mine ? | |
|
| |
Hiro Super Member
Posts : 544 Reputation : 16 Join date : 2012-04-27 Age : 40 Location : Newcastle, Australia
| Subject: Re: TRD2000 Corrolla p/n's Mon Dec 16, 2013 9:53 pm | |
| I'd just be looking around any local wreckers, especially the big open-air ones. Any AE102 (ie 1.8, so Conquest, RV, CSX 1.8, Ultima) will have rear discs (CSi and CSX 1.6 AE101s have the drums), whereas you have to find a bugeye CSX/Levin, or facelift Levin/Sportivo/Ultima (the Ascent and Conquest still have drums) AE112. AE102s should be more common too, since they were sold for longer ('94 to '99, whereas the 112 was only late '98 to late '01) and I'm fairly sure in greater numbers. | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Mon Dec 16, 2013 10:39 pm | |
| There are a bunch of bug eyes with rear disc at my local I can use there set up ?
Like this one ?http://images.drive.com.au/drive_images/Editorial/2006/09/04/4usedM_m.jpg | |
|
| |
Hiro Super Member
Posts : 544 Reputation : 16 Join date : 2012-04-27 Age : 40 Location : Newcastle, Australia
| Subject: Re: TRD2000 Corrolla p/n's Mon Dec 16, 2013 10:58 pm | |
| Can't recall if the setup is identical, but if you grab all the associated hardware (rotors, calipers, hubs, etc, maybe even control arms too) then I doubt you'll run into much problem. The AE10x and AE11x essentially run the same chassis. | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Mon Dec 16, 2013 11:02 pm | |
| I'll stick my head under one in the weekend with the camera | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Tue Dec 17, 2013 11:59 am | |
| I've had a response from a guy wrecking some non turbo sw20 I asked him for the short side drive shaft
He asked me I I need abs or non abs?
Does it matter ?
He mentioned auto or manual as well ?
Does that matter?
| |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Tue Dec 17, 2013 12:03 pm | |
| Do I just ask for the shaft and cv? Anything else I should ask for while I'm there? | |
|
| |
miib14 Site Administrator
Posts : 7382 Reputation : 175 Join date : 2011-04-27 Age : 33 Location : Manchester
| Subject: Re: TRD2000 Corrolla p/n's Tue Dec 17, 2013 5:56 pm | |
| i dont think it matters about the abs ring. however you want a full short shaft inc the CV from a Manial | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Tue Dec 17, 2013 7:18 pm | |
| I'll tell him now to keep the manual shaft aside | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Thu Dec 19, 2013 1:01 pm | |
| Ok good news friends
Paid for entire disk brake assembly Hubs , discs , proportioning valve , handbrake cables
And the short side sw20 drive shaft!!!
Getting a big pile of stuff
Will Do the brakes first | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Thu Dec 19, 2013 1:58 pm | |
| Any tips for the brake swap? | |
|
| |
miib14 Site Administrator
Posts : 7382 Reputation : 175 Join date : 2011-04-27 Age : 33 Location : Manchester
| Subject: Re: TRD2000 Corrolla p/n's Thu Dec 19, 2013 7:59 pm | |
| rear brake swap or front? | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Thu Dec 19, 2013 9:26 pm | |
| | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Thu Dec 19, 2013 11:04 pm | |
| I'll use that Toyota DIY website to get the rav 4 engine mount them I'm set
I have the details of a guy who makes custom looms So will have a talk with him when te time comes | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Mon Dec 23, 2013 2:58 pm | |
| So chaps this happened on friday ended up with no gears and rolled home hahha as you can see it was taped up a while ago as the plastic was all broken and i tried to get replacements second hand but there were a few different kinds for the ae101 so i just taped it up so i made an order to Toyota and now im waiting for the parts to come in just over $200.00 AUD pn# 33821 its now sitting like this waiting for the part to come in its a shame as i will be doing the engine swap to a 3s soon so its hard to justify but i need it running for the time being was pretty bad | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Mon Jan 06, 2014 5:50 pm | |
| i paid for the cable at toyota before xmas and they said today sorry we cant supply so im stuck with no where to go please see the diagram below so toyota don't have this part for sale in Australasia anymore and there are not many in the wreckers/breakers yards at the moment i was hoping that there was an aftermarket company that made these but no luck as yet any input from you guys? | |
|
| |
magweal New Zealand Rep
Posts : 1403 Reputation : 42 Join date : 2011-12-14 Age : 41 Location : Auckland, New Zealand
| Subject: Re: TRD2000 Corrolla p/n's Mon Jan 06, 2014 6:34 pm | |
| They should be able to get it from Japan. Let me know I should be able to source a new 1 for you, or better yet I'll have a FXGT cable available in a couple of weeks | |
|
| |
miib14 Site Administrator
Posts : 7382 Reputation : 175 Join date : 2011-04-27 Age : 33 Location : Manchester
| Subject: Re: TRD2000 Corrolla p/n's Mon Jan 06, 2014 7:31 pm | |
| You can use the corolla shifter cables for the 3s swap too | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Tue Jan 07, 2014 9:12 pm | |
| | |
|
| |
miib14 Site Administrator
Posts : 7382 Reputation : 175 Join date : 2011-04-27 Age : 33 Location : Manchester
| Subject: Re: TRD2000 Corrolla p/n's Tue Jan 07, 2014 9:56 pm | |
| | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Wed Jan 29, 2014 8:22 am | |
| We'll I have the new (used)ones here at work now I'm on a 12 hour shift and I won't be home until 7pm
Just want I go home and fix this I miss driving it I'm currently driving the wife's nissan cube ad it's slooooow | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Wed Feb 05, 2014 10:13 pm | |
| all fixed! great to be driving her again! | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Thu Mar 06, 2014 2:16 pm | |
| Quick question guys
the beams im buying is missing the north south mounts
im assuming i can use the one from a 5sfe like in a celica as they are the same as 3sge mounts
regards | |
|
| |
Currymeister Member
Posts : 107 Reputation : 0 Join date : 2013-11-18
| Subject: Re: TRD2000 Corrolla p/n's Thu Mar 06, 2014 8:07 pm | |
| argh the toyota diy site no longer has diagrams?! | |
|
| |
gold94corolla Site Administrator
Posts : 5234 Reputation : 181 Join date : 2011-04-29 Age : 37
| Subject: Re: TRD2000 Corrolla p/n's Fri Mar 07, 2014 9:22 am | |
| Apparently not, or so I heard... | |
|
| |
Sponsored content
| Subject: Re: TRD2000 Corrolla p/n's | |
| |
|
| |
| TRD2000 Corrolla p/n's | |
|