Having steel rims made up

Ok so I went another direction and will get some custom steel rims made up

I'll be using camry 15 inch steel rims now I just wanted to get some clarification in regards to the sizes I wanted

In relation to camber needed

Ican't run more camber in the back than the front but would like the guard to be pretty full

My tentative specs are

Front - 15x8+28

Rear - 15x8+18

Most likely with a 195 tyre and using bcbr coil overs

Up to 2 deg neg camber is okay up front
However I would like to keep it under 2 deg in the rear


Are those sizes feasible for what I'm asking?
After a bit of research it's the best I could come up with

Are you getting the Camry wheels re-drilled? They'll all be 5x100 or 5x114.3

Our 4 cylinder camrys are 4x100

What year?

Not sure but saw a set in the wreckers
They were 15s manager said they are off a camry
$50 not bad

The chap who does the whelel mods can step up the 14 to 15 but costs a little more
So I save a bit by starting with 15's

Pretty sure he meant celica but they fit so who knows

Getting back to the sizes

Someone who has a greater knowledge than me let me know if my wanted specs are off at all?

No Camry sold in Aus had 4x100 wheels, especially not 15" ones.  As for Celicas, they are either 4x114.3 (RWD) or 5x100 (FWD), with the lone exception of the ST ST162 which had 13" 4x100 alloys.
There are some ZZE122 Corollas (the last of the 4x100s) with 15" steelies, I'd say they're probably those

Got you thanks for letting me know

ok ready to order when the shop reopens

15x8+30 front

15x8+25 out back